Protective Ensemble (Class 1) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 1) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack^® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7
  

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 1) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack^® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7
  

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 2) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack^® X3 
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: R57975; R58481; R58484; R58427; R57970; R58480; R58483; R58486; R57976; R58482; R58485) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHS^®7000 Hybrid System: DHR 7000 Face Piece (Model Nos: R58492, R57970, R58480) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 2) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack^® X3 
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: R57975; R58481; R58484; R58427; R57970; R58480; R58483; R58486; R57976; R58482; R58485) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHS^®7000 Hybrid System: DHR 7000 Face Piece (Model Nos: R58492, R57970, R58480) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 2) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
  

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 3) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Airboss Defense AMG Glove - Model Nos.: 0M990530 through 0M990536 Airboss Defense Coolmax^® Lycra inner glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)
  • Haix Airpower R2 Boot - Model No.: 605109

Breathing Systems:

• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 APR
• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 PAPR
• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 MP-PAPR

• Avon FM53 Tight Fitting Face Piece (Model No.: FM53) with Avon CBRNF 12B Cap1 APR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1) with Avon CBRN Cap1 APR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1-C420) with Avon CBRN Cap1 PAPR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1-C420) with Avon CBRN Cap1 PAPR

• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 APR
• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 PAPR
• Avon FM53 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 MP-PAPR
  

• MSA Millenium Face Piece (Model Nos.: 10006231, 10006232, 10006233) with MSA CBRN APR Cap 1 or MSA Responder CBRN PAPR Cap 1
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with CBRN Cap 1 APR (#045135 Canister)
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with C420 SureSeal System^™ CBRN Cap 1 PAPR
• Scott AV3000 HT SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with FFR SureSeal System^™ CBRN Cap 1 APR
• Scott AV3000 HT SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with C420 SureSeal System^™ CBRN Cap 1 PAPR
• Immediate Response Technologies (IRT) Model C420 CBRN Cap1 PAPR System with Scott Promask 2000 Full Fitting Face Piece

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, thigh pockets, equipment tabs, belt loops, integrated knee pads & elbow pads, and adjustable PAPR hose holders in rear.
• Available with an optional Rini liquid penetrator valve assembly.
  
• The Extended Response Team Ensemble - (XRT) model above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 3-Ruggedized) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems:

• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 APR
• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 PAPR
• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon MP-CBRN Cap1 PAPR

• Avon FM53 Tight Fitting Face Piece (Model No.: FM53) with Avon CBRN 12B Cap1 APR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1) with Avon CBRN Cap1 APR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1-C420) with Avon CBRN Cap1 PAPR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1-C420) with Avon CBRN Cap1 MP-PAPR

• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 APR
• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 PAPR
• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 MP-PAPR

• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with CBRN Cap 1 APR (#045135 Canister)
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with C420 SureSeal System^™ CBRN Cap 1 PAPR
• Scott AV3000 HT SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with FFR SureSeal System^™ CBRN Cap 1 APR
• Scott AV3000 HT SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with C420 SureSeal System^™ CBRN Cap 1 PAPR

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, equipment tabs, belt loops, and adjustable PAPR hose holders in rear.
• Available with an optional Rini liquid penetrator valve assembly.
• The RC3 Ensemble model above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Protective Ensemble (Class 4) for First Responders to Chemical/Biological Terrorism Incidents which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Airboss Defense AMG Glove - Model Nos.: 0M990530 through 0M990536 Airboss Defense Coolmax^® Lycra inner glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)
  • Haix Airpower R2 Boot - Model No.: 605109

Breathing System:

• Immediate Response Technologies (IRT) Model C420 CBRN Cap1 PAPR System with Scott Promask 2000 Full Fitting Face Piece

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, thigh pockets, equipment tabs, belt loops, integrated knee pads & elbow pads, and adjustable PAPR hose holders in rear.
• Available with an optional Rini liquid penetrator valve assembly.
• The Extended Response Team Ensemble - (XRT) model above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

NOTE: Recognized as a footwear component for use in the manufacture of an NFPA 1990 (NFPA 1994 Class 1) footwear element.

NOTE: Recognized as a footwear component for use in the manufacture of an NFPA 1990 (NFPA 1994 Class 1) footwear element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 1 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 1 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 2 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 2 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 2 - Ruggedized ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 2 - Ruggedized ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE® CHEMPAK® SP Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times. The components consist of:

• Liner: GORE® CHEMPAK® SP fabric
• Overglove: NOMEX® knit back with black leather palm glove

Product Note: This ensemble element shall be used only with a certified Class 3 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE® CHEMPAK® SP Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times. The components consist of:

• Liner: GORE® CHEMPAK® SP fabric
• Overglove: NOMEX® knit back with black leather palm glove

Product Note: This ensemble element shall be used only with a certified Class 3 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 3 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 3 ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 3-Ruggedized ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified Class 3-Ruggedized ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack® X3

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: R57975; R58481; R58484; R58427; R57970; R58480; R58483; R58486; R57976; R58482; R58485) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7
• Draeger DHS^®7000 Hybrid System: DHR 7000 Face Piece (Model Nos: R58492, R57970, R58480) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA
• Scott Vision C5 Face Piece (Model Nos.: 201550-01, 201550-02, 201550-03) with Scott Air-Pack® X3

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3
• Draeger DHR7000 Face Piece (Model Nos: R57975; R58481; R58484; R58427; R57970; R58480; R58483; R58486; R57976; R58482; R58485) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7
• Draeger DHS^®7000 Hybrid System: DHR 7000 Face Piece (Model Nos: R58492, R57970, R58480) with Draeger AirBoss^™ PSS^® 7000 H SCBA

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Liquid Splash Protective Ensemble for Hazardous Materials Emergencies which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems:

• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 APR
• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon CBRN Cap1 PAPR
• Avon C50 Full Fitting Face Piece (Model Nos.: 70501-61, 70501-62, 70501-63) with Avon MP-CBRN Cap1 PAPR

• Avon FM53 Tight Fitting Face Piece (Model No.: FM53) with Avon CBRN 12B Cap1 APR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1) with Avon CBRN Cap1 APR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1-C420) with Avon CBRN Cap1 PAPR
• Avon FM53 Tight Fitting Face Piece (Model No.: M53A1-C420) with Avon CBRN Cap1 MP-PAPR

• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 APR
• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 PAPR
• Avon FM54 Tight Fitting Face Piece (Model No.: FM54) with Avon CBRN Cap1 MP-PAPR

• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with CBRN Cap 1 APR (#045135 Canister)
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with C420 SureSeal System^™ CBRN Cap 1 PAPR
• Scott AV3000 HT SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with FFR SureSeal System^™ CBRN Cap 1 APR
• Scott AV3000 HT SureSeal System^™ Face Piece (Model Nos.:805337-31, 805337-32, 805337-33) with C420 SureSeal System^™ CBRN Cap 1 PAPR

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, equipment tabs, belt loops, and adjustable PAPR hose holders in rear.
• Available with an optional Rini liquid penetrator valve assembly.
• The RC3 Ensemble model above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

Liquid Splash Protective Ensemble for Hazardous Materials Emergencies which is certified as a complete non-encapsulating ensemble with a chlorobutyl rubber molded hood to face piece gasket seal and the following elements:

Glove System:

• Inner Glove: G9492-C2 GORE CHEMPAK^® Ultra Barrier Inner Glove
• Outer Glove: G9492-OGL Outer Glove

Footwear:

• Outer boot footwear worn with this ensemble must measure at least 140 mm (5.5 in.) high and be certified to NFPA 1951, NFPA 1971, NFPA 1991, NFPA 1992, NFPA 1994 or NFPA 1999
• This ensemble was tested with the following footwear options:
  • OnGuard - HazMax^® - Model No.: 87012
  • OnGuard - HazMax^® EZ-FIT - Model No.: 87015
  • Tingley HazProof^® Boot - Model No.: 82330 (orange)
  • Tingley HazProof^® Boot - Model No.: 82331 (black)

Breathing Systems (NFPA 1981-2018):   

• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-37, 805337-38, 805337-39) with Scott Air-Pack® X3
• Draeger DHR7000 Face Piece (Model Nos: (Sm)-R63502; R63505; R63508; R63511; (Med)-R63501; R63504; R63507; (Lg)-R63510; R63505; R63506; R63509; R63512) with Draeger PSS^® 7000 DHR SCBA

Breathing Systems (NFPA 1981-2013):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-1366-7, 7-1366-8, 7-1366-9) with MSA FireHawk^® M7XT Airmask
• MSA G1 Face Piece (Model Nos.: 7-2770-1, 7-2771-1, 7-2772-1) with MSA G1 SCBA
• Scott AV3000 HT Face Piece (Model Nos.: 805337-34, 805337-35, 805337-36) with Scott Air-Pack^® or Scott Air-Pack^® X3

Breathing Systems (NFPA 1981-2007):

• MSA Ultra^® Elite Face Piece (Model Nos.: 7-935-7, 7-935-8, 7-935-9) with FireHawk^® M7 Air Mask SCBA
• Scott AV3000 SureSeal System^™ Face Piece (Model Nos.: 805337-31, 805337-32, 805337-33) with Scott Air-Pack^® or Scott NxG7

Product Notes:

• Customization Options: radio pocket, hook-and-loop ID pads, retroreflective trim/lettering, tactical “playbook” on forearm, drag rescue system loops, equipment tabs, and belt loops.
• The Multi-Threat suit models above are considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The GORE^® CHEMPAK^® Ultra Barrier Glove System is a glove system consisting of a glove liner and overglove which must be worn together at all times.

The components consist of:

• Liner: GORE^® CHEMPAK^® Ultra Barrier fabric
• Overglove: NOMEX^® knit back with black leather palm glove

Product Note:

• This ensemble element shall be used only with a certified ensemble that has been tested, certified and labeled identifying the appropriate ensemble element.

The  AlphaTec^® EVO vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® EVO certified model is a front entry vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system):

• Outer Glove:  AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer:  AlphaTec^® #02-100

Footwear:

• Tingley HazProof® Boot - Model No.:82330 (may be purchased from an authorized Tingley Dealer)
• OnGuard HazMax® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell.  The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® EVO CV /-V and EVO VP1 /-V vapor protective suits:

Product Note: The AlphaTec^® EVO above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The  AlphaTec^® EVO vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® EVO certified model is a front entry vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system):

• Outer Glove:  AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer:  AlphaTec^® #02-100

Footwear:

• Tingley HazProof® Boot - Model No.:82330 (may be purchased from an authorized Tingley Dealer)
• OnGuard HazMax® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell.  The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® EVO CV /-V and EVO VP1 /-V vapor protective suits:

Product Note: The AlphaTec^® EVO above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The AlphaTec^® FLASH vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® FLASH certified model is a chloroprene rubber/fabric/barrier laminate vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system)

• Outer Glove: AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer: AlphaTec^® #02-100

Footwear:

• Tingley HazProof^® Boot - Model No.: 82330 (may be purchased from an authorized Tingley Dealer
• OnGuard HazMax^® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® FLASH vapor protective suit:

Product Note:

• The AlphaTec^® FLASH above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The AlphaTec^® FLASH vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® FLASH certified model is a chloroprene rubber/fabric/barrier laminate vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system)

• Outer Glove: AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer: AlphaTec^® #02-100

Footwear:

• Tingley HazProof^® Boot - Model No.: 82330 (may be purchased from an authorized Tingley Dealer
• OnGuard HazMax^® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® FLASH vapor protective suit:

Product Note:

• The AlphaTec^® FLASH above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove
  

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N)
  
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove
  

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N)
  
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove
  

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N)
  
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The  AlphaTec^® EVO vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® EVO certified model is a front entry vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system):

• Outer Glove:  AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer:  AlphaTec^® #02-100

Footwear:

• Tingley HazProof® Boot - Model No.:82330 (may be purchased from an authorized Tingley Dealer)
• OnGuard HazMax® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell.  The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® EVO CV /-V and EVO VP1 /-V vapor protective suits:

Product Note: The AlphaTec^® EVO above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The  AlphaTec^® EVO vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® EVO certified model is a front entry vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system):

• Outer Glove:  AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer:  AlphaTec^® #02-100

Footwear:

• Tingley HazProof® Boot - Model No.:82330 (may be purchased from an authorized Tingley Dealer)
• OnGuard HazMax® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell.  The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® EVO CV /-V and EVO VP1 /-V vapor protective suits:

Product Note: The AlphaTec^® EVO above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The AlphaTec^® FLASH vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® FLASH certified model is a chloroprene rubber/fabric/barrier laminate vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system)

• Outer Glove: AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer: AlphaTec^® #02-100

Footwear:

• Tingley HazProof^® Boot - Model No.: 82330 (may be purchased from an authorized Tingley Dealer
• OnGuard HazMax^® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Trelleborg. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® FLASH vapor protective suit:

Product Note:

• The AlphaTec^® VPS-Flash above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The AlphaTec^® FLASH vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® FLASH certified model is a chloroprene rubber/fabric/barrier laminate vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system)

• Outer Glove: AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer: AlphaTec^® #02-100

Footwear:

• Tingley HazProof^® Boot - Model No.: 82330 (may be purchased from an authorized Tingley Dealer
• OnGuard HazMax^® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Trelleborg. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® FLASH vapor protective suit:

Product Note:

• The AlphaTec^® VPS-Flash above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N) 
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N) 
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N) 
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The  AlphaTec^® EVO vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® EVO certified model is a front entry vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system):

• Outer Glove:  AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer:  AlphaTec^® #02-100

Footwear:

• Tingley HazProof® Boot - Model No.:82330 (may be purchased from an authorized Tingley Dealer)
• OnGuard HazMax® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell.  The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® EVO CV /-V and EVO VP1 /-V vapor protective suits:

Product Note: The AlphaTec^® EVO above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The  AlphaTec^® EVO vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® EVO certified model is a front entry vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system):

• Outer Glove:  AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer:  AlphaTec^® #02-100

Footwear:

• Tingley HazProof® Boot - Model No.:82330 (may be purchased from an authorized Tingley Dealer)
• OnGuard HazMax® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell.  The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® EVO CV /-V and EVO VP1 /-V vapor protective suits:

Product Note: The AlphaTec^® EVO above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The AlphaTec^® FLASH vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® FLASH certified model is a chloroprene rubber/fabric/barrier laminate vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system)

• Outer Glove: AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer: AlphaTec^® #02-100

Footwear:

• Tingley HazProof^® Boot - Model No.: 82330 (may be purchased from an authorized Tingley Dealer
• OnGuard HazMax^® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® FLASH vapor protective suit:

Product Note:

• The AlphaTec^® FLASH above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The AlphaTec^® FLASH vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The AlphaTec^® FLASH certified model is a chloroprene rubber/fabric/barrier laminate vapor protective, fully-encapsulating ensemble with (optional) ventilation system and 80 mil PVC visor with (optional) antifog lens mounted on the inside of the visor and (optional) Hands-Free Visor Light System, which is certified with the following elements:

Glove System (includes new bayonet glove attachment system)

• Outer Glove: AlphaTec^® Over Glove - AlphaTec #58-800
• Middle Glove:  AlphaTec^® #38-628
• Inner Barrier Layer: AlphaTec^® #02-100

Footwear:

• Tingley HazProof^® Boot - Model No.: 82330 (may be purchased from an authorized Tingley Dealer
• OnGuard HazMax^® - Model No.: 87012 or 87015 (may be purchased from an authorized OnGuard Dealer)
• Dunlop Hazguard^® Ultra - Model No.: 87012-EU (may be purchased from an authorized Dunlop/OnGuard Dealer)

Breathing system:

• SCBA is required but not supplied by Ansell. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services.

The Pass Thru options listed below are certified with the AlphaTec^® FLASH vapor protective suit:

Product Note:

• The AlphaTec^® FLASH above is considered certified as an ensemble ONLY when the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensemble model listed above is also certified for the following Optional Performance Requirements:

• Chemical Flash Fire Protection Performance Requirements of NFPA 1990/NFPA 1991
• Liquefied Gas Protection Performance Requirements of NFPA 1990/NFPA 1991

The Frontline 500 is a fully encapsulated protective suit with integral booties and a 3-layer 40 mil PVC / 5 mil FEP / 4 mil PET visor with integrated anti-fog coating. The Frontline 500 is certified as a front entry or rear entry ensemble consisting of the following general components:

Glove System:

• Inner Barrier Layer: Kappler 2N1^® - Multilayer Glove System
• Outer Glove: Nomex^®/Leather Flight Glove

Footwear:

• Onguard HazMax^® Boot - Model No.: 87012
• OnGuard HazMaz^® EZ-Fit Boot - Model No.: 87015
• Tingley HazProof^® Boot - Model No.: 82331 or 82330

Breathing system: SCBA is required but not supplied by Kappler. The SCBA must be CBRN certified by NIOSH and certified as compliant to NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service.

The following pass-thru options are available:

• Scott w/Schrader Fitting (Option 7T)
• Scott w/Hansen Fitting (Option 7S)
• Scott w/EBBS Fitting (Option 7A)
• MSA Dual (Option 7M)
• MSA Quick-Fill (Option 7N) 
• Honeywell w/Schrader Fitting (Option 7X)
• Honeywell w/Hansen Fitting (Option 7Y)

Product Notes:

• The OnGuard HazMax^® and Tingley Hazproof^® boots are not supplied by Kappler but may be obtained from an authorized dealer.
• The Frontline 500 ensemble above is considered certified as an ensemble ONLY when all of the above listed ensemble elements are worn with the above listed garment element.

The Kappler Frontline 500 vapor protective ensembl